UV-8300LV

UV/LED CURE EPOXY ADHESIVE

UV-8300LV

FLASHBOND™ UV-8300LV is a low viscosity, light curing epoxy adhesive that bonds well to a wide variety of substrates including metals, glass, ceramics and some plastics. This product exhibits good surface wetting and adhesion to glass and many plastics. This product requires direct light exposure during cure. Because of the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cure in the presence of visible light (400- 415nm). Can be cured at 150°C for shadowed areas if necessary.

Product Specifications

No.of Components 2
Mix Ratio by Weight
Mixed Viscosity @RT(cps) 2,000-4,000
Pot Life @25°C(100 gram)
Recommended Cure 5-8 seconds @ 405nm, Intensity 250 mW
Alternate Cure 10 seconds @ 365nm, Intensity 250 mW/cm
Color Clear
Specific Gravity 1.14
Hardness(Shore) D-78
Refractive Index
Lap Shear Strength @25°C(psi)
Tg(°C) 135
CTE(Below Tg)10-6/°C
Service Temp.Range -55°C - 250°C
Thermal Conductivity(W/m°K)
Volume Resistivity(500 V) 1 x 10^14

Recommended Applications

Use the form below to request additional information & product data