SetWORX 411HP is a toughened, rigid, aluminum filled, one-part epoxy and cures in 40 minutes at 120°C. SetWORX 411HP is analogous to the widely used Scoth-WeldTM 2214 which can cost over $70.00 for a 6 fl. Oz. cartridge. SetWORX 411HP offers the same performance for half the cost.
Load-bearing adhesives have high cohesive strength to bond high strength materials and potentially replace mechanical fasteners. What is cohesive strength?It is the ability of adhesive molecules to remain connected and not tear apart. Adhesives with low cohesive strength bond to a surface, but still cannot hold the joint together. Depending on the adhesive, you can bond metal, wood, rubber, ceramic, composites, engineering grade plastics, glass and more. Reaching a 4500-psi overlap shear strength, SetWORX 411HP is designed to bond the load-bearing parts of products. Powerful enough to replace mechanical fasteners and welds, these extremely high strength materials can bond metals.
|Mix Ratio by Weight||NA|
|Mixed Viscosity @RT(cps)||Paste|
|Pot Life @25°C(100 gram)||3 months|
|Recommended Cure||45 min @125°C|
|Alternate Cure||20 min @ 150°C|
|Lap Shear Strength @25°C(psi)||3000|
|Service Temp.Range||-55°C to 230°C|
|Volume Resistivity(500 V)||>10^13|
Use the form below to request additional information & product data