FLASHBOND™ UV-2910DC is an innovative light cure epoxy adhesive. It has unique features that allow for fast processing and fixturing of parts. Once the adhesive has been activated with UV light, it has set open time that allows for assembly of parts. The product continues to cure at room temperature or rapidly cures when exposed to low temperature heat. The cured product exhibits low shrinkage and excellent thermal, water and chemical resistance. Typical applications include bonding of optics, connectors, fibers, lenses, prisms and other electronic components where low shrinkage and low outgassing are required.

Product Specifications

No.of Components 1
Mix Ratio by Weight
Mixed Viscosity @RT(cps) 2,500-5,000
Pot Life @25°C(100 gram)
Recommended Cure 15 seconds @ 405nm, Intensity 250 mW/cm
Alternate Cure Pre-activate with 5 sec @ 405nm, 125-150 mW/cm + 16 hours @ 25C
Color Clear
Specific Gravity 1.12
Hardness(Shore) D-75
Refractive Index
Lap Shear Strength @25°C(psi) 2500
Tg(°C) 45
CTE(Below Tg)10-6/°C 59
Service Temp.Range -55°C - 150°C
Thermal Conductivity(W/m°K)
Volume Resistivity(500 V) 1.0 x 10^14

Recommended Applications

Use the form below to request additional information & product data